金沙最新登录入口-3833com金沙官网-首页

0531-83510047
13964193999

  • 金沙最新登录入口
  • 华锋先容
  • 金沙最新登录入口-3833com金沙官网-首页
  • 3833com金沙官网
  • 资讯中心
  • 在线留言
  • 联系大家

大家都在搜: 食品级输送带 切菜机输送带 流水输送带 同步带 橡胶输送带

当前位置: 首页 - 资讯中心 > 常见问题 > 常见问题

大倾角输送带发生掉皮怎么办?

来源: 时间:2020-04-15 11:21:33 浏览次数:
  大家知道的传送带在生产过程中由于摩擦大倾角下降和材料导致橡胶带表面,大倾角耐热输送带更容易出现这种情况,由于运输、高温材料受到高温的影响容易剥落,这一切发生的时候,会大大减少输送带的生活。大家将说明皮肤脱皮的原因和解决方法。
  We know that in the production process of the conveyor belt, the rubber belt surface is caused by the drop of the friction big angle and the materials, and the big angle heat-resistant conveyor belt is more prone to this situation. Because the transportation and high-temperature materials are easy to peel off due to the impact of high temperature, when all this happens, the life of the conveyor belt will be greatly reduced. We will explain the causes and solutions of skin desquamation.
  首先,大家会了解输送带剥落的原因。首先,带后增塑的,肮脏的材料附着在传送带上时,通过改变辊,这将使传送带上剥离。第二,传送带的增塑剂降水,使传送带层之间的附着力和强度大大降低,导致剥落。
  First of all, we will understand the causes of belt peeling. First, when plasticized, dirty material is attached to the belt, it will peel off the belt by changing the roller. Second, the plasticizer precipitation of the conveyor belt greatly reduces the adhesion and strength between the conveyor belt layers, resulting in peeling off.
  那么如何解决大倾角输送带的表面剥离问题呢?
  So how to solve the problem of the surface peeling off of the high angle conveyor belt?
食品级输送带
  首先,大家需要检查适合输送带的物料和合适的生产环境。如果不选择合适的输送带,大倾角输送带的寿命会大大降低。其次,操作人员必须进行相应的输送带运维操作的常识培训,必须对设备进行相应的检查,发现故障问题必须及时处理,防止发生更严重的事故。第三,大倾角的输送带模型应与输送装置匹配,不匹配的输送带将导致输送带损坏。
  First of all, we need to check the materials suitable for the conveyor belt and the suitable production environment. If the right conveyor belt is not selected, the life of the high angle conveyor belt will be greatly reduced. Secondly, the operators must carry out the corresponding professional knowledge training of conveyor belt operation and maintenance operation, and must carry out the corresponding inspection of the equipment. If any fault is found, it must be dealt with in time to prevent more serious accidents. Third, the belt model with large inclination angle should match with the conveyor, and the mismatched conveyor will cause the conveyor belt damage.
  以上是造成大倾角输送带损坏的主要原因。只有采取适当的措施,才能防止皮带的非正常磨损。
  The above is the main reason for the damage of high angle conveyor belt. Only by taking proper measures can the abnormal wear of the belt be prevented.
上一篇:如何确定输送带的胶料比例?
下一篇:耐热输送带覆盖胶的配方材料先容!

相关产品

  • PVC传送带
    PVC传送带
  • PU输送带
    PU输送带
  • 大倾角输送带特点
    大倾角输送带特点
  • 山东输送带定做
    山东输送带定做
  • 山东输送带生产厂家
    山东输送带生产厂家
  • 普通切菜机输送带
    普通切菜机输送带

相关文章

  • 保养和维护食品级输送带对于使用很关键!
  • 同步轮同步带的基础你都明白吗?
  • 流水线输送带正常运转需要注意什么?
  • 三角带是如何保证设备正常运转的?
  • 山东输送带生产厂家:耐高温输送带主要应用领域
  • 山东输送带生产厂家:什么输送带应该在高温环境下使用?
  • 橡胶输送带规格型号怎么识别?
  • 煤矿用移动皮带输送怎样加长?
  • 怎样选择适合本行业的食品级输送带
  • 挡板输送带广泛的应用优点

产品中心 PRODUCT CENTER

  • 食品级输送带
  • PVC输送带
  • 切菜机输送带
  • 流水输送带
  • 同步带
  • 橡胶输送带
  • 易洁带
  • 印花导带
  • PU输送带

联系大家CONTACT US

手机:13964193999(孙经理)
座机:0531-83510047
QQ(客服):136559297
地址:山东省济南市章丘区刁镇民营经济开发区

金沙最新登录入口|3833com金沙官网

XML 地图 | Sitemap 地图