金沙最新登录入口-3833com金沙官网-首页

0531-83510047
13964193999

  • 金沙最新登录入口
  • 华锋先容
  • 金沙最新登录入口-3833com金沙官网-首页
  • 3833com金沙官网
  • 资讯中心
  • 在线留言
  • 联系大家

大家都在搜: 食品级输送带 切菜机输送带 流水输送带 同步带 橡胶输送带

当前位置: 首页 - 资讯中心 > 企业资讯 > 企业资讯

移动式输送带打滑的问题怎么解决?

来源: 时间:2021-01-31 16:34:00 浏览次数:
1.初张力太小:输送带离开滚筒处的张力不够造成输送带打滑;这种情况一般发生在启动时,解决的办法是调整拉紧装置,加大初张力;
1. The initial tension is too small: the tension at the place where the conveyor belt leaves the drum is not enough, which causes the conveyor belt to slip; this kind of situation generally occurs when starting, and the solution is to adjust the tension device and increase the initial tension;
2.传动滚筒与输送带之间的摩擦力不够造成打滑,其主要原因多半是输送带上有水或环境潮湿,解决办法是在滚筒上加些松香末,但要注意不要用手投加,而应用鼓风设备吹入,以免发生人身事故;
2. The friction between the driving roller and the conveyor belt is not enough, which causes the slip. The main reason is that there is water on the conveyor belt or the environment is humid. The solution is to add some rosin powder on the roller, but pay attention not to add it by hand, but to use the blower equipment to blow in, so as to avoid personal accidents;
山东输送带批发
3.尾部滚筒轴承损坏不转或上下托辊轴承损坏不转的太多,造成损坏的原因是机尾浮沉太多,没有及时检修和更换已经损坏或转动不灵活的部件,使阻力增大造成打滑;
3. The tail roller bearing is damaged and does not rotate or the upper and lower idler bearings are damaged and does not rotate too much. The reason for the damage is that there are too many floats and sinks at the tail, and the damaged or inflexible rotating parts are not repaired and replaced in time, which increases the resistance and causes slipping;
4.启动速度太快也能形成打滑,此时可慢速启动。如使用鼠笼电机,可点动两次后再启动,也能有效克服打滑现象;
4. If the starting speed is too fast, it can also cause slippage. At this time, it can start slowly. If the squirrel cage motor is used, it can be inched twice and then started, which can also effectively overcome the slip phenomenon;
5.输送带的负荷过大,超过电机能力也会打滑,此时打滑有利的一面是对电机起到了保护作用。否则时间长了电机将被烧毁。但对于运行来说则是打滑事故。
5. If the load of the conveyor belt is too large, it will slip even if it exceeds the capacity of the motor. At this time, the favorable side of the slip is that it has a protective effect on the motor. Otherwise, the motor will be burned after a long time. But for the operation, it is a slip accident.
以上就是山东输送带批发https://www.huafengxiangsu.com 为大家先容的内容,感谢您在百忙之中查看我企业的信息内容,如果您想要了解的更多,欢迎您来电进行咨询!
The above is Shandong conveyor belt wholesale https://www.huafengxiangsu.com  Thank you for checking our company's information in your busy schedule. If you want to know more, you are welcome to inquire!
上一篇:耐热输送带的生产原料有哪几种?
下一篇:清洗橡胶输送带应该注意哪些?

相关产品

  • PVC传送带
    PVC传送带
  • PU输送带
    PU输送带
  • 大倾角输送带特点
    大倾角输送带特点
  • 山东输送带定做
    山东输送带定做
  • 山东输送带生产厂家
    山东输送带生产厂家
  • 普通切菜机输送带
    普通切菜机输送带

相关文章

  • 保养和维护食品级输送带对于使用很关键!
  • 同步轮同步带的基础你都明白吗?
  • 流水线输送带正常运转需要注意什么?
  • 三角带是如何保证设备正常运转的?
  • 山东输送带生产厂家:耐高温输送带主要应用领域
  • 山东输送带生产厂家:什么输送带应该在高温环境下使用?
  • 橡胶输送带规格型号怎么识别?
  • 煤矿用移动皮带输送怎样加长?
  • 怎样选择适合本行业的食品级输送带
  • 挡板输送带广泛的应用优点

产品中心 PRODUCT CENTER

  • 食品级输送带
  • PVC输送带
  • 切菜机输送带
  • 流水输送带
  • 同步带
  • 橡胶输送带
  • 易洁带
  • 印花导带
  • PU输送带

联系大家CONTACT US

手机:13964193999(孙经理)
座机:0531-83510047
QQ(客服):136559297
地址:山东省济南市章丘区刁镇民营经济开发区

金沙最新登录入口|3833com金沙官网

XML 地图 | Sitemap 地图